NAD C 3030S

STEREO INTEGRATED AMPLIFIER The NAD C 3030S Integrated Amplifier combines vintage-inspired design with the power of BluOS streaming. Signature details such as illuminated VU meters and cursive NAD branding reference NAD’s early amplifiers, whilst BluOS built in enables seamless access to music through the BluOS Controller app. With 50 watts per channel of NAD amplification, the C 3030S delivers clear, composed sound across a wide range of listening levels. HDMI eARC and a built-in phono input allow it to integrate naturally into modern music and TV-based systems. KEY FEATURES BluOS built-in streaming for access to music services and multi-room playback via the BluOS Controller app 50 watts per channel of NAD amplification Vintage-inspired design with VU meters and cursive NAD branding HDMI eARC input for straightforward TV integration Moving Magnet phono input for vinyl playback Bluetooth for wireless music playback Optical and line-level analogue inputs for additional sources Bass-managed subwoofer output with optional fixed 80 Hz high-pass filter Front-panel headphone output for private listening Supplied remote control for everyday operation PREAMPLIFIER SECTION LINE INPUT, PRE-OUT (ANALOG BYPASS ON) THD (20 Hz – 20 kHz) 90 dB (IHF, A-weighted, 500 mV out, unity gain) Input impedance (R and C) 28 kohms + 360 pF Maximum input signal >5.7 Vrms (0.1 % THD) Output impedance 345 ohms Input sensitivity 100 mV (500 mV out, Volume maximum) Frequency response 20 Hz – 20 kHz (±0.3 dB) Maximum voltage output >5 V (0.1 % THD) LINE IN, HEADPHONE OUT THD (20 Hz – 20 kHz) 90 dB (32 ohms load, A-weighted, 1V out, unity gain) Frequency response 20 Hz – 20 kHz (±0.3 dB) Channel separation >60 dB at 1 kHz Output impedance 22 ohms GENERAL SPECIFICATIONS LINE IN, SPEAKER OUT Continuous output power into 8 ohms and 4 ohms 50 W (20 Hz – 20 kHz at rated THD, both channels driven) THD (20 Hz – 20 kHz) 90 dB (A-weighted, 500 mV input, 1 W out in 8 ohms) Clipping power >70 W (1 kHz 0.1 % THD, 4 ohms) >55 W (1 kHz 0.1 % THD, 8 ohms) IHF dynamic power 8 ohms: 120 W 4 ohms: 250 W 2 ohms: 390 W Peak output current >16 A (1 ohm, 1 ms) Damping factor >52 (20 Hz to 6.5 kHz, 50 W, 8 ohms) Frequency response 20 Hz – 20 kHz (±0.3 dB) Channel separation >75 dB (1 kHz) >70 dB (10 kHz) Input sensitivity (50 W in 8 ohms) 750 mV Frequency band 2.402 G – 2.480 G Maximum transmit power 7 dBm ± 2 dBm Power consumption, standby mode* 0.5 W LINE IN, PHONO INPUT THD (20 Hz – 20 kHz) 82 dB (10 mV in, A-weighted, 1 W out) Input impedance (R and C) 46 kohms / 100 pF Input sensitivity 1.6 mV (20 Hz – 50 W out, Volume maximum) Frequency response 20 Hz – 20 kHz (±0.3 dB) >16 A (1 ohm, 1 ms) Note: The RIAA response is consistent with a pre-emphasis that is rolled off at 50 kHz by a second order filter, such as used in Neumann cutting lathes. Maximum input signal at 1 kHz >15 mVrms (0.1 % THD) DIMENSION AND WEIGHT Gross dimensions (W x H x D) ** 356 x 129 x 329 mm 14 1/8 x 5 1/8 x 13 inches Net weight 5.8 kg (12.8 lbs) Shipping weight 7.2 kg (15.9 lbs) BluOS SPECIFICATIONS BluOS AUDIO Supported audio file format MP3, AAC, WMA, OGG, WMA-L, ALAC, OPUS Supported high-resolution audio file format FLAC, MQA, WAV, AIFF Sampling rate up to 192 kHz Bit depths 16 – 24